|
|
|
|
Joined: Sep 2004
Posts: 50
Member
|
|
Member
Joined: Sep 2004
Posts: 50 |
DOES ANYONE OUT THERE NO HOW I CAN GO ABOUT RESTTING THE SX200...IS IT DONE BY THE CIRCUIT BOARD NEAR THE POWER SUPPLY WHERE IT SAYS"RESET" AND WILL I LOSE ALL PROGRAMMING ON THE PBX?
I POWERED DOWN THE PBX TWICE TODAY AND IT CAME UP PRETTY QUICK BUT WHEN I POWERED DWN/UP FOR THE 3RD TIME APPROX. 2 HRS.LATER THE PBX TOOK ABOUT 15 MINS TO ACTUALLY COME BACK ONLINE AND I HAD ABOUT 5 ALARMS GOING ON DURING THE REBOOT.THE 1ST 2 BOOTS ONLY TOOK ABOUT 2 MINS TOPS IF THAT LONG.
THANKS FOR YOUR HELP.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Why do you keep doing resets? A good Mitel SX200D really doesn't require a reset for anything unless it stops working.
------------------
Bound to cover,
just a little more ground.
|
|
|
|
|
Joined: Sep 2004
Posts: 50
Member
|
|
Member
Joined: Sep 2004
Posts: 50 |
DrPBX,
Thanks for your reply,however my intention was not to place importance on the shouting but to get some advice on these issues i am having.
I did a few resets because i thought this would help but now i know the sx200d does'nt need it thanks to you!
These kind of replies is what makes this forum great.
Thanks again Dr.
|
|
|
|
Forums84
Topics94,465
Posts639,682
Members49,828
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
