COB to be installed on FX-II expansion cabinet?

Support Service-Disabled Veterans!
Discount software from Direct Deals

Print Thread

Rate Thread

Page 2 of 2

1

2

Re: COB to be installed on FX-II expansion cabinet? sonny88 #560293 10/23/13 02:57 PM
Joined: Aug 2004 Posts: 9,169 Likes: 18 SOUTH TEXAS RATHER BE FISHING Admin
RATHER BE FISHING Admin Joined: Aug 2004 Posts: 9,169 Likes: 18 SOUTH TEXAS	The issues we found were with IST cards in the second cabinet of a 2 cabinet install with the SCSI expansion...didn't seem to have issues with ribbon expansion. It was on 3 separate hospital sites. Since tech support is virtually non existent from the factory I'd move a digital card if I had the choice to be safe.

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: COB to be installed on FX-II expansion cabinet? sonny88 #560304 10/23/13 06:59 PM
Joined: Nov 2010 Posts: 144 Vancouver, Canada sonny88 Member
sonny88 Member Joined: Nov 2010 Posts: 144 Vancouver, Canada	Nice RBF as what they have is the ribbon expansion...I guess I should be okay moving the IST on the expansion cabinet. I will update once done. Thanks again to both of you. sonny

Re: COB to be installed on FX-II expansion cabinet? sonny88 #560361 10/24/13 11:48 PM
Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA 5years&counting Moderator-Comdial, ESI, Voicemail, Cisco
5years&counting Moderator-Comdial, ESI, Voicemail, Cisco Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA	Doesn't the use of the ribbon expansion also have the caveat of the buffer board? I'm remembering issues introduced when using the buffer boards. Justin

Re: COB to be installed on FX-II expansion cabinet? 5years&counting #560370 10/25/13 09:29 AM
Joined: Aug 2004 Posts: 9,169 Likes: 18 SOUTH TEXAS RATHER BE FISHING Admin
RATHER BE FISHING Admin Joined: Aug 2004 Posts: 9,169 Likes: 18 SOUTH TEXAS	Yep.. They caused a lot of issues. We threw them away and used the ribbon only.

Re: COB to be installed on FX-II expansion cabinet? sonny88 #560380 10/25/13 12:18 PM
Joined: Nov 2010 Posts: 144 Vancouver, Canada sonny88 Member
sonny88 Member Joined: Nov 2010 Posts: 144 Vancouver, Canada	ISTM works fine so far... hi rbf, I might need a step by step trans.txt programming...so I replaced the Interchange with a COB yesterday and can't seem to have the routing corrected. It's good that they have a receptionist to answer calls. In the interchange...there's a field in the routing box 800 wherein you can route according to day/night service like to other routing boxes which is not available in the COB. I've posted this also under the delayed ring as you talked about trans.txt there. Kindly advise. Thanks. sonny