|
|
Joined: Oct 2001
Posts: 11
Member
|
Member
Joined: Oct 2001
Posts: 11 |
Help! Wonderful little system in a warehouse situation until radio station bleeds in after dial tone is broken. The radio station is NOT on the phone line, and when the base set is in the metal shop the station is not heard. Only in the wood frame office, and in every room and at every jack and on every phone line. Tried: grounding all un-used conductors, moving to different areas, disconnected un-used cables, and jacks. Need ideas!! or a solution would be NICER!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2001
Posts: 12
Member
|
Member
Joined: Aug 2001
Posts: 12 |
The KX-T200 is digital from base to handset, so your RFI is coming from the field cabling in the wood structure. Is there a X-connect point in the steel building? Can you pull a shielded cable from the steel frame to the wood frame?
|
|
|
|
Joined: Oct 2001
Posts: 4,043
Member
|
Member
Joined: Oct 2001
Posts: 4,043 |
Also keep in mind if you use shielded cable, tie all the shields together at one end and ground them at one point. You don't want to create a ground loop which could act as a big antenna and make the matter worse.
|
|
|
|
Joined: Oct 2001
Posts: 11
Member
|
Member
Joined: Oct 2001
Posts: 11 |
<font face="Verdana, Arial" size="2">Originally posted by patgray75: The KX-T200 is digital from base to handset, so your RFI is coming from the field cabling in the wood structure. Is there a X-connect point in the steel building? Can you pull a shielded cable from the steel frame to the wood frame?</font> Thanks, tried your idea, didn't work.
|
|
|
|
Joined: Oct 2001
Posts: 11
Member
|
Member
Joined: Oct 2001
Posts: 11 |
<font face="Verdana, Arial" size="2">Originally posted by MrGemini: Also keep in mind if you use shielded cable, tie all the shields together at one end and ground them at one point. You don't want to create a ground loop which could act as a big antenna and make the matter worse.</font> Thanks, tried your idea, didn't work.
|
|
|
|
OS 7030
by Bushmills - 09/03/24 12:42 PM
|
|
|
|
Forums84
Topics94,387
Posts639,267
Members49,800
|
Most Online5,661 May 23rd, 2018
|
|
2 members (nortelvoip, Bob3470),
256
guests, and
54
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|