atcomsystems.ca/forum
Posted By: KENB DSX cutover handout - 10/04/07 06:52 PM
I'm in the process of making a cutover handout sheet with common user instructions recently asked on cuts to save my back,sanity and time reexplaining these features in the user guides.They can read other features in user guides ,most people dont want or wont take training and are the biggest complainers.
I figured I could staple this to their forehead or hand.

I'm including:
1- entering personal speed dial.
2-transfer a call / transfer direct to mailbox.
3- page over telephones .
4- leave a message in cowokers mailbox.
5- call your mailbox internally /from external location.
6- conference

any others ?? suggested
Posted By: skip555 Re: DSX cutover handout - 10/04/07 07:28 PM
your Cell number laugh

Ive found I need to point the display prompts out to the customers they really help once they realize that they're there

I try to find the Office "techie" and give them in depth instructions hoping they will pass some of it along
Posted By: Keighlar Re: DSX cutover handout - 10/05/07 05:54 AM
Ken,

I have a master training sheet for the DSX set up if you'd like to take a look at it. It probably covers more than you'll want to use, but I just edit out the parts that aren't needed on a per-customer basis. I'll just need to send it as an attachment. Let me know and I'll look up your email address somewhere. smile
Posted By: dougster Re: DSX cutover handout - 10/05/07 01:58 PM
Quote
Originally posted by Keighlar:
Ken,

I have a master training sheet for the DSX set up if you'd like to take a look at it. It probably covers more than you'll want to use, but I just edit out the parts that aren't needed on a per-customer basis. I'll just need to send it as an attachment. Let me know and I'll look up your email address somewhere. smile
Would it be possible to get a copy also? Thanks.

Doug

[email protected]
Posted By: KENB Re: DSX cutover handout - 10/05/07 04:04 PM
Stacey,
have it and its great
Thank you
aok
Posted By: JordonJ Re: DSX cutover handout - 10/05/07 06:03 PM
If I could also get a copy that would be great!

[email protected]

We have been installing these like crazy!

I have made a cheat sheet using Visio too...
Posted By: Keighlar Re: DSX cutover handout - 10/06/07 08:12 AM
Emails sent. I hope you find them helpful - at least a spring board to customizing them to your needs. If you have any improvement suggestions, please feel free to let me know. :toothy:
Posted By: telman3756497 Re: DSX cutover handout - 10/07/07 06:17 PM
Could I get a copy too?
[email protected]
Posted By: Keighlar Re: DSX cutover handout - 10/08/07 05:25 AM
jjordan - Your box is full laugh
Posted By: cosmo57 Re: DSX cutover handout - 10/08/07 10:43 AM
Could you send me a coipy also.

[email protected]

Thanks Again
Posted By: DSX Deus Re: DSX cutover handout - 10/08/07 01:28 PM
Just wondering why a training sheet is necessary? Is there something missing from the users guide that comes with the phones?
Posted By: dans Re: DSX cutover handout - 10/08/07 01:28 PM
Stacy,

Could I please please please have a copy sent?
Posted By: Keighlar Re: DSX cutover handout - 10/08/07 02:00 PM
More copies sent. smile
Posted By: KENB Re: DSX cutover handout - 10/08/07 02:08 PM
No Bill
In my opinion the user guide is difficult to read
for the end user ,although everything is there.
Each user has their hot button[s] that they want to do.

Say personal speed dial ,Its in the book at least twice ,but to read expanded text makes it easier on them and certainly on me .
Posted By: jp1525 Re: DSX cutover handout - 10/08/07 02:37 PM
May I get a copy as well? [email protected].

Thanks Much
Posted By: dougster Re: DSX cutover handout - 10/08/07 05:01 PM
Thanks for the document Stacy.
Nice Work.

Doug
Posted By: ALLN1 Re: DSX cutover handout - 10/08/07 09:26 PM
If it is not too much trouble would you also send me a copy.

[email protected]

Thanks
Posted By: Keighlar Re: DSX cutover handout - 10/09/07 07:27 AM
Bill,

I find that the training sheets are laid out to be very user-friendly in their simplicity so that after I leave the training session, customers have something to look at that is set up specifically for those options which they have told me are important to them.

In our project meeting before the installation, I go over all the options with the customer and they decide how they want the system to function to their best advantage.

The training sheets then reflect:
1. Basic calling features
2. Fixed buttons and their functionality
3. Programmable buttons and soft keys which they have decided they will be using.

Customers are also given the DSX documentation, but when I return to site for maintenance, 9 times out of 10 they still have their training sheets but have no idea where the DSX phone guide is.

It's not because the DSX documentation is difficult to understand. In fact, I find it probably the most easily understood of any of the systems I work with. I believe the difference is simply in the customization.

No offense intended to DSX. smile
Posted By: dell Re: DSX cutover handout - 10/09/07 10:46 PM
Stacy please send me a copy of that cut over [email protected]
Posted By: KLD Re: DSX cutover handout - 10/10/07 04:17 AM
Stacey,

Just a comment on your handout..... IT'S GREAT !!!

To prove the point, did a change-out on a Saturday. Was there for opening on Monday. Had the guide under each set ( IF there is one in the box---can't order them anymore frown ).

Handed the POC for the project (also answering point for the lawyer's office)the three ring binder with the manuals that come with the system. Included was the CD. So the complete documentation was available, in factory form.

Yesterday was a "tweaking" visit and these people are still doing what most customers do....ask for options and operating procedures... as they write it down in their own way of comprehending how it is done----their own "cheat sheet". Even with every extension on a DSS button and named, they still make lists of names and extension numbers.

As most users only use five basic features, you have really done a good job of fleshing it out. As I use the KISS system, I train the receptionist who then trains the crew. The one's who say they don't need training are the one's who cause the service calls that claim "our old system did it, I did it just like that and it didn't work".

Sorry for the rant, it IS a lawyer's office !!! laugh
Posted By: Keighlar Re: DSX cutover handout - 10/11/07 10:24 AM
Thank you, Ken. laugh
Posted By: Mickamg Re: DSX cutover handout - 10/11/07 10:27 AM
Stacey, if I may, can I ask you to send a copy to me as well? [email protected]

Thanks!
Posted By: ThePhoneGod Re: DSX cutover handout - 10/11/07 10:52 AM
If you could i would also like a copy. Thanks in advance. [email protected]
Posted By: gutmcha Re: DSX cutover handout - 10/11/07 02:26 PM
I'd like to have one as well
[email protected]
Posted By: Keighlar Re: DSX cutover handout - 10/12/07 05:39 AM
Copies sent
Posted By: 94astro Re: DSX cutover handout - 10/13/07 03:12 PM
Can I have one too? Pleeeeease!

You should start charging for this. (After me of course)

[email protected]
Posted By: thill Re: DSX cutover handout - 10/14/07 10:56 AM
Hi, New guy here. Could I get a copy of your DSX cut sheet.
TIA
Tom
[email protected]
Posted By: skip555 Re: DSX cutover handout - 10/14/07 11:17 AM
looks like you've got a marketable product , Stacy
laugh
Posted By: Keighlar Re: DSX cutover handout - 10/15/07 08:11 AM
It's starting to look that way, isn't it? laugh I'll just have to keep quiet about all the other instructional sheets I have!!!
Posted By: DrPbx Re: DSX cutover handout - 10/15/07 02:20 PM
May I Please have a copy. Thanks.
Posted By: 94astro Re: DSX cutover handout - 10/15/07 10:58 PM
Thanks Stacey, this is good stuff...
Posted By: Keighlar Re: DSX cutover handout - 10/16/07 05:46 AM
Thanks, astro.
Posted By: Chris Hunger Re: DSX cutover handout - 10/17/07 08:01 AM
May I please have a copy?

[email protected]

thanks.
Posted By: brokeda Re: DSX cutover handout - 10/17/07 10:16 AM
Me too!!! Thanks in advance
[email protected]
Posted By: Keighlar Re: DSX cutover handout - 10/17/07 01:28 PM
Got you both.
Posted By: Pots Re: DSX cutover handout - 10/21/07 06:40 AM
Could I please have a copy
thanks in advance
[email protected]
Pots
Posted By: TITOG Re: DSX cutover handout - 10/21/07 07:31 AM
ME TOO PLEASE

[email protected]
Posted By: ibluto Re: DSX cutover handout - 10/22/07 03:25 AM
I would appreciate a copy also. Thanks.
[email protected]
Posted By: mikochan Re: DSX cutover handout - 10/22/07 06:27 AM
me to please
thanks

[email protected]
Posted By: Keighlar Re: DSX cutover handout - 10/22/07 08:56 AM
It appears it was a busy weekend. smile Sent.
Posted By: phonedog Re: DSX cutover handout - 10/23/07 02:09 PM
I agree the user-guides are REALLY hard to understand for a new user. I would appreciate a copy of what you use. Thanks!! Steve
[email protected]
Posted By: Brian H Re: DSX cutover handout - 10/27/07 11:34 AM
Stacey,

May I please have a copy also? Please send to [email protected]

Thanks in advance
Posted By: Keighlar Re: DSX cutover handout - 10/29/07 06:21 AM
Sent
Posted By: Cablegirls Re: DSX cutover handout - 11/17/07 05:24 PM
Hi... I would really appreciate a copy also. and thank you in [email protected]
Posted By: DSX Deus Re: DSX cutover handout - 11/17/07 07:20 PM
Quote
Originally posted by phonedog:
I agree the user-guides are REALLY hard to understand for a new user.
Could someone please explain what the problem is with the user guides? They seem simple to understand to me.
Posted By: ttech Re: DSX cutover handout - 11/18/07 12:27 AM
Some customers want something with just the features they use, and some want more info than what in the user's guide, but get find the multibutton users guide a little to much reading for their taste.

I personally find the users guides fine, but I do handout a sheet for the intramail that says to log in and record your greeting do this, to record your name do this, to set up a security code do this....congrats you mailbox is set up
Posted By: sesame Re: DSX cutover handout - 12/23/07 07:12 AM
hello, could someone send me a copy of the reference sheet? thanks so much!
[email protected]
Posted By: erock Re: DSX cutover handout - 12/24/07 04:50 AM
Hey Stacy,
I would love to have one of them if possible.
Thanks, Erock
[email protected] smile
Posted By: maxcomm Re: DSX cutover handout - 12/26/07 10:17 AM
Another request, please!

[email protected]

Thanks in advance...
Posted By: Pete Largo Re: DSX cutover handout - 12/27/07 06:25 PM
May I please have a copy?

[email protected]

Thanks !
Posted By: Keighlar Re: DSX cutover handout - 12/28/07 09:57 AM
I think I'm caught up on everyone. Let me know if I missed you.

Stacey
Posted By: teleco Re: DSX cutover handout - 12/28/07 01:46 PM
Please send 1 to [email protected]
© Sundance Business VOIP Telephone Help