|
|
|
|
Joined: Dec 2002
Posts: 348
Member
|
|
Member
Joined: Dec 2002
Posts: 348 |
Have you tried replacing the power supply?
Never blame on malice, what can be adequately attributed to STUPIDITY!!
|
|
|
|
|
Joined: Apr 2007
Posts: 21
Member
|
|
Member
Joined: Apr 2007
Posts: 21 |
No we havn't changed the PSU's. Its 3 cabinets and the problem is not specific to 1 cabinet. Might have to look at that.
|
|
|
|
|
Joined: Dec 2002
Posts: 348
Member
|
|
Member
Joined: Dec 2002
Posts: 348 |
Hook your butt set to the power and listen for the buzz.
Never blame on malice, what can be adequately attributed to STUPIDITY!!
|
|
|
|
|
Joined: Apr 2007
Posts: 21
Member
|
|
Member
Joined: Apr 2007
Posts: 21 |
The thing is we can't make it happen. It just appears about every 30 to 40 days. We will have to wait till it happens again. Don't know what else to do.
|
|
|
|
|
Joined: Oct 2006
Posts: 57
Member
|
|
Member
Joined: Oct 2006
Posts: 57 |
We have the same problem with similar config. We also changed power supplies and ground. We replaced cabinet and did an upgrade. We have no IP and NO PRI and T1. We know it is a backplane issue but did not narrow down. We have a WICMC wich we moved to different slots. Are you generating timeslot errors when this happens?
I am starting to think it is traffic on th 8TC's
All systems with PRI's do not have the problem.
|
|
|
|
|
Joined: Oct 2006
Posts: 57
Member
|
|
Member
Joined: Oct 2006
Posts: 57 |
We have the same problem with similar config. We also changed power supplies and ground. We replaced cabinet and did an upgrade. We have no IP and NO PRI and T1. We know it is a backplane issue but did not narrow down. We have a WICMC wich we moved to different slots. Are you generating timeslot errors when this happens?
I am starting to think it is traffic on th 8TC's
All systems with PRI's do not have the problem.
|
|
|
|
|
Joined: Feb 2009
Posts: 2
Member
|
|
Member
Joined: Feb 2009
Posts: 2 |
I have a similar static issue in a single shelf IPx 500 except this system statics the UcMC announcements and vm's every 30 days or so. It requires a restart to eliminate the problem. We have somewhere around 50 of these systems and only 2 have this problem. We recently upgraded one of the MCP's to 15.84 so will see if that makes a difference.
|
|
|
|
|
Joined: Oct 2006
Posts: 57
Member
|
|
Member
Joined: Oct 2006
Posts: 57 |
We started having the problem once we added the 3rd cabinet. We also to noticed it is not only on outside trunks but also on station to station calls
|
|
|
|
Forums84
Topics94,402
Posts639,362
Members49,808
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
113
guests, and
73
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
