|
Joined: Nov 2008
Posts: 299
Member
|
Member
Joined: Nov 2008
Posts: 299 |
OK...a little question about VM Our Chamber of Commerce office is using a Legend system. It's way overkill for them (it's a 2-person office), but I donated the unit, so they couldn't beat the price. They get a lot of calls that should be directed to the mayors office, the library, the public works department, you name it. They like to hit transfer, dial "9" + the number and hang up. That means they are tying up two lines on a call that isn't even for them. In fact, this two-person office has kept 5 lines because this happens so often. If they plug in a POTS phone to their line, they can use a centrex style hookswitch flash along with a *xx code to transfer the call, and it doesn't tie up one much less two lines. So the question is: If I pop in a 007MLM card, can it be programmed to transfer calls via the hookswitch method, so they could drop a couple of lines, or do they need to keep five lines? Remember guys, I'm pretty much a Legend newbie--be nice! ![help help](/forum/images/graemlins/default/help.gif)
Dylan. SATUBAW (Some American techs use BIX as well)!
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
Member
Joined: Feb 2007
Posts: 2,473 |
007 doesn't have a Centrex Transfer capability according to my knowledge. You need to install Merlin Messaging Rel.2.2 and higher.
|
|
|
|
Joined: Jul 2001
Posts: 3,347 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,347 Likes: 10 |
Merlin Messaging won't get it either. There is no option for Centrex Transfer from a selector code in the Auto Attendant, like there is in Partner Messaging. I've been caught there before.
The reason is that Single Line extensions (which is what the voice mail ports are) cannot do a flash to the outside line.
However, if your Legend is R6 or higher, there is "Centrex Transfer via Remote Call Forwarding" - You forward an extension to an outside number, but instead of 9 for an outside line, you program it with * and pause, then the outside number.
You would create "phantom" extensions using adjunct ports, give them AND the voice mail ports permission for RCF and Trunk to Trunk transfer, give the adjuncts authorization codes so that you can forward them, and finally you can direct your selector codes to the new, forwarded, extensions.
|
|
|
|
Joined: Nov 2008
Posts: 299
Member
|
Member
Joined: Nov 2008
Posts: 299 |
Oh...that's nice! I didn't think of forwarding an extension...
I'm not sure of the release, but I'll find out...
Thanks for the advice!
Dylan. SATUBAW (Some American techs use BIX as well)!
|
|
|
|
OS 7030
by Bushmills - 09/03/24 12:42 PM
|
|
|
|
Forums84
Topics94,387
Posts639,267
Members49,800
|
Most Online5,661 May 23rd, 2018
|
|
|
|