Can't find Capabilities in 30 DAG04

Support Service-Disabled Veterans!
Discount software from Direct Deals

Print Thread

Rate Thread

Page 2 of 2

1

2

Re: Can't find Capabilities in 30 DAG04 Old blond hippity hopping Bunnie #579015 10/17/14 12:12 PM
Joined: Mar 2001 Posts: 3,869 Los Angeles, CA Old blond hippity hopping Bunnie Member
Old blond hippity hopping Bunnie Member Joined: Mar 2001 Posts: 3,869 Los Angeles, CA	Thank you all, he read out the software,he could have been mistaken, I know we went through everything and never found "capabilities." I will look for permissions. This is kind of a sad case, he is trying to start a business on one line and his house is being repossessed so I did what I could on the phone, his supercap is dead, he has no memory on the system. Am I right in guessing that the DR software cartridge has no memory, it is on the motherboard? THE Bracha, old blond specialist in Rube Goldberg solutions.

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: Can't find Capabilities in 30 DAG04 Old blond hippity hopping Bunnie #579018 10/17/14 02:09 PM
Joined: Feb 2005 Posts: 1,615 Toronto, Canada Curlycord Member
Curlycord Member Joined: Feb 2005 Posts: 1,615 Toronto, Canada	I think 6X16 and 8X24's memory caps are on the Software Cartridge. Older software try under Configuration/Sets/2X/Handsfree Something like that. =---()))))))))---= www.curlycord.com Toronto, Canada

Re: Can't find Capabilities in 30 DAG04 Old blond hippity hopping Bunnie #579020 10/17/14 02:57 PM
Joined: Jun 2006 Posts: 8,734 Likes: 4 Cookshire-Eaton MooreTel Moderator-Nortel, Computers, General
MooreTel Moderator-Nortel, Computers, General Joined: Jun 2006 Posts: 8,734 Likes: 4 Cookshire-Eaton	For 6x16's, the software card started having caps for DR5 (as well as caps on the mother board.). Before that, it was solely on the mother board. Again, your version code indicates 6x16, DR2, revision 4. Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons". Dave. (CTUB) Canadian Techs Use Bix!

Re: Can't find Capabilities in 30 DAG04 Old blond hippity hopping Bunnie #579021 10/17/14 03:25 PM
Joined: Feb 2005 Posts: 1,615 Toronto, Canada Curlycord Member
Curlycord Member Joined: Feb 2005 Posts: 1,615 Toronto, Canada	Makes sense, thats why the software casing is thicker at the top. =---()))))))))---= www.curlycord.com Toronto, Canada

Re: Can't find Capabilities in 30 DAG04 Old blond hippity hopping Bunnie #579610 10/27/14 07:17 PM
Joined: Mar 2001 Posts: 3,869 Los Angeles, CA Old blond hippity hopping Bunnie Member
Old blond hippity hopping Bunnie Member Joined: Mar 2001 Posts: 3,869 Los Angeles, CA	Been meaning to say thanks, Capabilities was called "Permissions" and it was under B. Gen. Admin. That is ancient software. Thanks so much, Bracha THE Bracha, old blond specialist in Rube Goldberg solutions.