need some help from you guys or gals. what I have is a 15p and what I need to do is put a dialer on it. this what I have a 15p, a altronix rb5 relay and a ad-2001 dailer. I try to hook up and failed. how would i hook this up. thanks for all your help. firefighter

I can ask at work...I think we do some Ademco panels.
Doesn't this panel have provisions to wire an RJ31X into it? I assumed dialers were built in...

yes but it will only dial out to a central station I been told. thats why I am going with a dialer

Actually, the 15P has the capability of dialing pagers if that helps your situation.

Otherwise I think a 4204 relay module may be what you're looking for.

Another way you may be able to trigger the dialer is by using the alarm output (siren output) voltage, 12 vdc, to power a 12 volt relay which in turn would trigger the dialer. This is the "Down & Dirty" way of doing things but I've used it on systems that did not have any other means. The 4204 is the best way to go about it if possible.

bobby,
thanks how would I wire that in and do I get that from ADI?
Thanks dennis

The 4202 is available from ADI (I just called to verify that) and it connects directly to the motherboard. I think there may also be some system programming involved.
The wiring instructions are described in the installer's manual and there should be instructions with the module as well.

If you want to use a relay you can get a 12 volt relay at Radio Shack. Then wire the relay coil terminals to the alarm output.
You can use the relay N/O or N/C contacts to trigger the dialer.

I have rb5 and that has a no and a nc on it. I can't figure how to hook it up. it keeps the relay open and dial out all the time, I come off lead 4 and 5 from panel and go to the no and comm and nc and com to 4 and 5 it doesn't work

thanks dennis

Jeff you find anything thanks

I asked at work, he said you would need a dialer because it will only dial a central station or pager.
I don't know enough about how the rest of it all works though.

PM sent.

Thanks all got it last nite about 11:30 Thanks for all your help if you need me call me or pm me. Have a great 4th

:thumb: Glad you got it!

Just wondering what the solution was...

well we through we got it we are going to reset the dailer some time this week and start over. we will let you guys know. Thanks Bobby and Jeff for the help