atcomsystems.ca/forum Forums Telephony Discussion Phone & VoIP Systems Avaya - Lucent Telephones & Systems IP office display issue.

We changed out some hardware on our IP Office and now the telephone does not display the name or ext number and an internal call does not display name or ext number, I am sure it is something simple I guess I'm just too simple to figure it out or my day has just been too long.

You can go into the display settings of the phone to turn this back on.

Not seeing that on the phones. We found that phones that are plugged into a digital 30 are the ones affected. Any ideas?

What model phones are you using?

If you are using the 1400/1600 series, try this:

1400 Phones – Do these steps on initial installation

· FEATURES
· [Up Arrow] 3 Times
· SELECT (Call Settings)
· [Up Arrow] 3 Times
· ON (Show Waiting Call)
· BACK
· [Up Arrow]
· SELECT (Phone User)
· [Up Arrow]
· SELECT (Phone Screen Settings)
· [Up Arrow]
· CHANGE (Display Name ON)
· DONE

· “A” Menu
· [Down Arrow]
· SELECT (Call Settings)
· ON/OFF (Visual Alerting On)
· DONE
· EXIT

do these settings have to be done from the phone? Can they be done from Manager? Copied from phone to phone?

Unfortunately, it needs to be done from the phone, and it you make a new User for the Extension port, you have to do it all over again. The settings do stick through power up and down, however.

The name display doesn't seem to stick through power up and down.. am I missing a setting?

and what does the G mean in the upper left of the display, with the arrow under it..

In initial post you mentioned that you've changed out hardware. Did you swap out the control? If so, did you upgrade all of the expansion modules to match the control software level?
Mike

Mike,

its all brand new out of the box 500v2 hardware. How do I know if any software upgrades need to be done?