|
Joined: Feb 2010
Posts: 503 Likes: 1
Member
|
Member
Joined: Feb 2010
Posts: 503 Likes: 1 |
I have a customer that is installing a Verkada door box/intercom when I plugged my cable in with a crimp on it, it appeared that it bent the pins
Customer had installed this device on a test bench in his office. Everything was fine. I brought it out to the field and plugged it into a cable with a new crimp on it and it looked like it bent the pins. I’ve never seen anything like this before. They just received a replacement and the same thing happened Just wondering if anybody has experienced this I reached out to another tech in the field, and I asked him if he was having problems with those crimps, and he had mentioned that they were having problems with them but I’m not sure if it was the same problem that I’m having we actually bent the pins of a device
I’ve been using these for years and I do buy the more expensive ones I know you can get them pretty cheap but I usually buy the more expensive ones I do get them from Amazon but I guess you never know right
Crazy
😜
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2002
Posts: 17,726 Likes: 19
Member
|
Member
Joined: May 2002
Posts: 17,726 Likes: 19 |
Are you using CAT6 plug ends and not CAT5? Also, is it 6 or 6A?
Retired phone dude
|
|
|
|
Joined: Feb 2010
Posts: 503 Likes: 1
Member
|
Member
Joined: Feb 2010
Posts: 503 Likes: 1 |
Cat 6 platinum tools I believe the brand is
|
|
|
|
Joined: Feb 2010
Posts: 503 Likes: 1
Member
|
Member
Joined: Feb 2010
Posts: 503 Likes: 1 |
Never really had a problem until this particular one device I’m drawing a blank on the name of the company they cell hosted cameras Verkada And it’s kind of funny because I’ve installed a few cameras cameras at this place, and they made a point to tell me to use patch cords
This particular, when I used the crimp, seems like the crimp is bending the pins inside the device. This particular device was an intercom system that’s outside the main door.
|
|
|
|
Joined: May 2002
Posts: 17,726 Likes: 19
Member
|
Member
Joined: May 2002
Posts: 17,726 Likes: 19 |
No idea. Bad batch of plug ends? Have you checked your crimp tool? What happens when you crimp a plug with no wires in it? You say it seems the crimp is bending the plugs, can you see the pins are bent and what makes you think they are if you can't physically see it? That's about all I can think of.
Retired phone dude
|
|
|
|
Joined: Dec 2005
Posts: 9,179 Likes: 8
Spam Hunter
|
Spam Hunter
Joined: Dec 2005
Posts: 9,179 Likes: 8 |
I Love FEATURE 00
|
|
|
|
Joined: Dec 2005
Posts: 9,179 Likes: 8
Spam Hunter
|
Spam Hunter
Joined: Dec 2005
Posts: 9,179 Likes: 8 |
My last employer used EZ to terminate CAT6 cabling in their Central Offices. Never had any problems. I purchased a crimper & supply of CAT5 & CAT 6 plugs. The only time I run into problems is if I squeeze the crimping tool too hard. That causes the plug to not lock into jacks. Otherwise, no problems.
I Love FEATURE 00
|
|
|
|
Joined: Dec 2007
Posts: 6,822 Likes: 22
Retired Admin
|
Retired Admin
Joined: Dec 2007
Posts: 6,822 Likes: 22 |
Call me silly but doesn't the term "Category", whether 5 ,5e, 6, 6a, et cetera refer to the filament and dimensions internal to an 8p8c .... or even a 10p10c modular plug. The exterior dimensions are the same per variety, keyed, non-keyed, shielded, et cetera. Given that, the cable Category doesn't apply and neither do the amount of positions or contacts.
Have you tried terminating on a keystone and use a patch cord? That's common practice.
|
|
|
|
Joined: May 2002
Posts: 17,726 Likes: 19
Member
|
Member
Joined: May 2002
Posts: 17,726 Likes: 19 |
Not quite following you there Dean. CAT5 and 5E are 24 gauge and the insulation on the conductors are the same, 5E just has a tighter twist. 6 and 6A are 23 gauge and with thicker insulation on the conductors and 6A has a thicker insulation than 6. So, you have to use the correct plug ends. Unless you mean something totally different than what I'm interpreting.
Retired phone dude
|
|
|
|
Joined: Dec 2007
Posts: 6,822 Likes: 22
Retired Admin
|
Retired Admin
Joined: Dec 2007
Posts: 6,822 Likes: 22 |
Hi Bill,
Basically I was trying to say the Housing is the same size no matter which Category cable.
|
|
|
Forums84
Topics94,445
Posts639,572
Members49,823
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
115
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|