|
|
Joined: Apr 2007
Posts: 607 Likes: 1
Member
|
OP
Member
Joined: Apr 2007
Posts: 607 Likes: 1 |
I have a few customers when caller hits auto attendant system won't recognize tone. this is intermittent and seems to be from wireless AT&T and Consumer Wireless accounts. Are there settings on the system that can be tweaked for this? Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 3,000 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,000 Likes: 4 |
This on outbound or inbound calls?
Sip, pots or isdn trunks?
Ip, sli or dgp phones?
|
|
|
|
|
Joined: Apr 2007
Posts: 607 Likes: 1
Member
|
|
OP
Member
Joined: Apr 2007
Posts: 607 Likes: 1 |
Only inbound when calls get answered by auto attendant. Analog pots trunks
|
|
|
|
|
Joined: Jun 2006
Posts: 3,000 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,000 Likes: 4 |
Many years ago I remember something similar. That's when we started getting the tone_db.inf file with the new software.
Double check you have this file
|
|
|
|
|
Joined: Apr 2007
Posts: 607 Likes: 1
Member
|
|
OP
Member
Joined: Apr 2007
Posts: 607 Likes: 1 |
Thanks Nameless. I'll check
|
|
|
|
|
Joined: Jan 2022
Posts: 47 Likes: 1
Member
|
|
Member
Joined: Jan 2022
Posts: 47 Likes: 1 |
i'm now having the same exact problem os7100 v4.95 just started happening recently out of no where Sip trunk lines. called spectrum and this is what they returned on their side Dear Valued Spectrum Enterprise Customer, The voice engineer assigned to your ticket saw a small amount of packet loss from "the called party to the caller", but otherwise found no problems and could not replicate the issue. Please contact us at 888 812 2591 opt 1 with further call examples if they occur over the next week - be advised, will we set this ticket to resolved if there's no communication by EoD 1/28. If you have questions or concerns regarding this service alert, please contact us and reference ticket number ECT-81029238. Phone: 888-812-2591 Email: [email protected]Thank you for choosing Spectrum Enterprise. i did get my hands on software verion 5.03 would that resolve it?
|
|
|
|
|
Joined: Jun 2006
Posts: 3,000 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,000 Likes: 4 |
Unlikely, but with a shot for the free licenses alone.
What's your dtmf type set to?
|
|
|
|
|
Joined: Jan 2022
Posts: 47 Likes: 1
Member
|
|
Member
Joined: Jan 2022
Posts: 47 Likes: 1 |
|
|
|
|
|
Joined: Aug 2004
Posts: 1,573 Likes: 21
Admin
|
Admin
Joined: Aug 2004
Posts: 1,573 Likes: 21 |
Usually it's one or the other - Inband or RFC2833. If possible, try turning Inband off while leaving RFC2833 on. We've seen a number of Cisco PBX's around here that don't interpret Inband DTMF when connected to a certain local SIP trunk provider.
![[Linked Image from web.atcomsystems.ca]](http://web.atcomsystems.ca/pic/atcom_logo_60px-high.png) Looking for a VoIP Phone Canada provider? Put Atcom's valuable VoIP expertise to work for your business today!
|
|
|
|
|
Joined: Jun 2006
Posts: 3,000 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,000 Likes: 4 |
Samsung's have 3 options. Inband, inband rfc2833 and outband from memory.
You may need to setup a wireshark trace and see if you're receiving the dtmf or not.
|
|
|
|
Forums84
Topics94,119
Posts638,001
Members49,726
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, justbill),
93
guests, and
26
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
