Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#638558 10/08/20 11:58 PM
Joined: Jan 2005
Posts: 15,367
Likes: 12
Moderator-Vertical, Vodavi, 1A2, Outside Wire
OP Offline
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,367
Likes: 12
I have a customer with an XTS-600 system who is experiencing failures of 12-port analog station cards, but ONLY in cabinet #2 (the third one). When these cards go bad, there is nothing on the ports, no dial tone, no battery, nothing. These ports can be called, but there's no talk path or ringing battery present on them. The system still allows the ports to be programmed as valid resources. Lately, I've just been using those dead ports for virtual extensions, etc.

The only thing that these cards have in common is that they've been pulled and replaced on a live system. The system is in a hospital, so powering it down for a card replacement isn't much of an option. The ones that failed (slots 2-0 and 2-3) were replaced with known good cards, but the same result occurred immediately. New card, all ports dead.

I know that the XTS system's predecessors and sister systems, such as the DVXplus II, III and XTSc have labeling indicating that NO cards can be changed without powering down the system. The XTS does not have these warnings. It was my understanding that the XTS systems DO allow for hot-swapping of cards. I remember in some other Vodavi systems, the documentation warned about issues with the ring generator connection or replacement on a live system. I don't see these warnings in the XTS documentation though.

I have a feeling that these cards are failing only because we're changing them on a live system. Other cards, such as PRIB, DTIB, etc. seem to work fine upon replacement. I'm a bit leery about replacing another failed SLIB-E card without confirming this concern. My next step is to replace the cabinet itself, but that's a chore that I really don't want to do on a live system since about 84 stations will be out of service during such.

Can anyone confirm the ability to hot-swap these cards? Better yet, can anyone offer any suggestions for my dilemma?

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Dec 2005
Posts: 649
Likes: 1
Joined: Dec 2005
Posts: 649
Likes: 1
I tried this many years ago, and I recall that I had issues as well. I don't remember exactly what went wrong as it has been many years. It is my understanding that NO cards should ever be swapped in ANY Vodavi system, while the system is powered up. I have never done so ever since. Might have to do a 3 am swap and hope the battery on the processor is good? Maybe just power down the 3rd cabinet?

"I thought I was wrong once, but I was mistaken"

Moderated by  EV607797, JWRacedog, MnDave, nfcphoneman 

Link Copied to Clipboard
Forum Statistics
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
205,814 Shoretel
183,683 CTX100 install
183,232 1a2 system
Newest Members
Jackie22, Griffin, Paso Telecom, goalieonyxvs, kb8doa
49,726 Registered Users
Top Posters(30 Days)
Toner 11
Yoda 6
jsaad 3
Who's Online Now
0 members (), 11 guests, and 30 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2023
Powered by UBB.threads™ PHP Forum Software 7.7.5