atcomsystems.ca/forum Forums Telephony Discussion Phone & VoIP Systems Samsung Telephones & Systems SPnet and AA transfers

I probably already know the answer to this, but I'm going to ask this anyways.

I have 2 systems tied together with spnet. System A is 7400 with svmi 20i.. System B is 7200s. All calls hit system A and then they get directed as needed. Dilemma is when calls hit system A and the extension is on system B obviously it doesn't get transferred because the AA doesn't know where to send it, because it thinks it's invalid. My question is, is there a way to make this happen without having to build an extension number for all of the extensions in system B on the 20i? Reading through the svmi manual isn't leading me to anything promising.

In Manager section 3.3.2, there are settings concerning mailboxes associated with each site. Check your settings there. If I remember correctly, setting Mailbox to 'yes' will auto-create mailkboxes for you, but you may have to spend some time deleting nonexistent extensions.

Be careful with this. I crashed a svmi20e doing this. Took many mailboxes.

It might pay to change your spnet programming in mmc724 to have 20, 21, etc rather than just 2 (for example).

This will allow you to reduce the number of mailboxes created.

I ended up just making extensions in the 20i for the other system. Then removed the transferring to in a separate eclass for them. So was in all a total of like 25 extra extensions.