|
|
|
|
Joined: May 2004
Posts: 334
Member
|
OP
Member
Joined: May 2004
Posts: 334 |
I verified that it's coming in from the LEC
I have it enabled in Trunks & Stations
They have a smisc3 installed
Any thoughts?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,318 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,318 Likes: 7 |
So you set 414, 312 .You can tell if cid is programmed on trunks because the trunk key will light red before it rings and turns green while the system collects the cid. Could be a bad misc card.If you have any single line ports installed a simple intercom call to a sli port will show "cid" if it is working
|
|
|
|
|
Joined: May 2004
Posts: 334
Member
|
|
OP
Member
Joined: May 2004
Posts: 334 |
Thanks for the reply, both MMC's are enabled and they have no SLI's, everything is pointing to the SMISC3 but I've never seen one fail before so I'm just throwing it out there to see if anyone else has had this happen before.
|
|
|
|
|
Joined: Sep 2001
Posts: 2,318 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,318 Likes: 7 |
I have seen a system "stop: receiving cid before.You may want to try a rest if you haven't already and check to see if you are running the last software version
|
|
|
|
|
Joined: Dec 2010
Posts: 681
Member
|
|
Member
Joined: Dec 2010
Posts: 681 |
Is it just not showing CID or is the CID showing the last number called? There is a fix for CID issue, depending on what your symptoms are.
|
|
|
|
|
Joined: May 2004
Posts: 334
Member
|
|
OP
Member
Joined: May 2004
Posts: 334 |
It's showing No caller ID received, it's a new customer for me and they said that they've never had CID before because they had to pay for it but now it comes in the package so they want it now.
|
|
|
|
|
Joined: May 2004
Posts: 334
Member
|
|
OP
Member
Joined: May 2004
Posts: 334 |
I had them look at the card status today and it's not showing the card in the misc slot, I had them reseat it etc. with no luck so I'm guessing the smisc3 is bad.
|
|
|
|
|
Joined: Dec 2010
Posts: 681
Member
|
|
Member
Joined: Dec 2010
Posts: 681 |
That supposedly could be an issue. Never really seen those MISC3's go bad just for no reason. As long as the little cable was connected from it to the MCP1. I've seen it not work, but still show up in the status screen. Try changing out the card and see what happens.
|
|
|
|
Forums84
Topics94,161
Posts638,205
Members49,735
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
48
guests, and
36
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
