atcomsystems.ca/forum Forums Telephony Discussion Phone & VoIP Systems NEC Telephones & Systems SL1100 Night Ring Special??

Hello all,
I have a customer that wants the Night Ring to be only from 01:00 to 08:00 7 days a week.
To me that seems to be a problem when I set Day Ring times from 08:00 to 01:00
From what I understand crossing past midnight with the time schedule will cause a problem.
Is that a problem or is there a better way to handle this type of schedule??
Also, the customer wants to have the phone ring only twice during Night Ring before InMail answers.
I can't seem to find that as an option. Need a hint as to where if possible.
Any assistance would be appreciated.
Thanks,
Les

Analog or Digital Trunking? Manual or automatic time switch?

Schedules will not cross over midnight. You need to use three settings. 00:00 - 08:30, 08:30 - 17:00, 17:00 - 00:00
Use virtuals for night mode with delay forwarding to VM.

Coral Tech:
FWIW This system has Analog Trunks and setting up for Auto Night Mode.

helpifican:
Yes I thought that the midnight cross over was going to be a problem. However, with the desired early morning schedule that if I ONLY place a schedule for All Days with a time of 01:00 to 08:00 that the system will switch to Night Mode during those hours.

Is it that simple?? or am I missing something in that I need to use the three settings as you describe??
Such as:
01:00 - 08:00
08:00 - 00:00
00:00 - 01:00

Thanks,

Les

The system uses a 24 hour format so it doesn't matter what time the end user wants night mode to begin or end, it can be done easily.

Thanks, problem has been resolved.

Les