atcomsystems.ca/forum Forums Telephony Discussion Phone & VoIP Systems Toshiba Telephones & Systems LVMU Integration problems

I'm having some difficulty receiving integration information on a CIX-100 with an LVMU.

The LVMU was locked up with all port status lights lit and rebooting it did not resolve the issue. I then used the battery strap to initialize the LVMU. After defaulting the card, it came up but I was unable to get integration working either using SMDI or inband DTMF integration.

I made the change with the Plug and Play settings between CIX100 and CIX100 SMDI and also adjusted the VM Port Settings in E-Manager to reflect whether the port is SMDI or not.

When running in SMDI mode, there does not appear to be any integration at all. Calls forwarding in system cf from extensions that have VMID set only go to the main greeting and so do calls from that extension to the vm.

I've only tested inband/DTMF mode remotely but what happens when I do a blind transfer, is that when the call is forwarded back to the vm, the vm simply transfers the call back again as if it is not getting the "91" prefix in the inband signalling string.

Any ideas? What could I be missing?

In the parameters setting of the SMDI section of the LVMU, make sure that the first vm port's DN matches what's in there.

Thank you Phonemeister. That seems to have resolved the issue. For some reason the second extension in the hunt group was listed. I don't recall entering it there after defaulting the card but I have slept since then. Who knows.

I changed it to the first extension and it is now sending unsupervised transfers into the correct voice mail. I will have the customer test when they get in this morning to make sure it is recognizing that they are calling from their extensions.

But it does appear that they are receiving the integration signaling. Thank you for your help.