|
|
|
|
Joined: Jun 2013
Posts: 2
Member
|
OP
Member
Joined: Jun 2013
Posts: 2 |
After an unschedule power cut the voicemail has stopped working I believe the system was off for a few hours, the programming is still there. No voice mailbox can be accessed and the delayed foward of the main number to voicemail no longer kicks In. Is there a way to to restart Vmail ??
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2008
Posts: 523
Member
|
|
Member
Joined: May 2008
Posts: 523 |
I would reseat the media card. This can be done at anytime and it does not drop calls or anything.
If the system cannot read the media card, you will get this. Pop it out and back in and retest. Okay to do during the day.
If it is a 7100 and the VM is embedded, there is not a way to reboot it without rebooting the system. I would just call the customer and tell them you're going to reboot it and it takes 4 and a half minutes to come back up and go to System Control / Commands / Reset and change System Reset to Reset and Save and do it there.
|
|
|
|
|
Joined: Jun 2013
Posts: 2
Member
|
|
OP
Member
Joined: Jun 2013
Posts: 2 |
I have been to system control/commands/Pre-install Reset and only have option to Reset or memory clear,does the reset leave the system programming as it was??
|
|
|
|
|
Joined: Jun 2006
Posts: 3,000 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,000 Likes: 4 |
A system reset will only restart the system, it won't wipe the programming, but if you want to be safe then take a backup of the programming prior to restarting it
|
|
|
|
Forums84
Topics94,118
Posts637,999
Members49,726
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
13
guests, and
26
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
