atcomsystems.ca/forum Forums Other TDM Phone Systems Sprint - Tadiran Telephones & Systems Sprint Protege Phone system

I have a Sprint Protege CTX KSU, Mat Code 431700, that I need softward for that works with Windows Vista if possible. Any help would be greatly appreciated

Delton

Nope ain't gonna happen.

The software to connect to the Protege system is DOS based through a DB-9 serial cable.

Windows XP does connect when using the CMD command. I have heard from some folks that they could not get a connection using the Windows Pro version.

Each Portege cabinet contains software version and one version will not talk a higher version. For example F3.F17 programming software will not communicate with a F3.F45 version KSU.

If you remove the cover on your CTX cabinet you should see 2 memory chips in slots U-13 and U14 (these should be parallel to the Heartbeat LED on the side of the cabinet)

You might see comething like:

K32S3.F14
U-13

The K32 means it is a CTX cabinet.
The S3 is the major revision number.
The.F14 is the minor revision number.

I can get you the correct software if you need, however if have done have the needed experience in telecommunications it might be best to search for a vendor in Idaho who would then be responsible if a mistake made.

If you have never done this before and do not have experience in telecommunications...

This is not an easy 1+1=2. It's the the same in your line of work, I would never think of trying to despense legal advice...I leave it to the professionals.

PM Sent