|
|
|
|
Joined: Feb 2007
Posts: 10
Member
|
|
Member
Joined: Feb 2007
Posts: 10 |
I have a customer with a FlexCom 400 it has both an UGW and IPG. We are installing a Callmanager Express at one of their locations and I would like to establish either a SIP or H323 trunk between the Tadiran and the Cisco. I can handle the Cisco configuration does anyone know the Tadiran configuration or can you point me to somewhere?
Thanks
Ed French CCIE#21241
|
|
|
|
|
Joined: Sep 2004
Posts: 4,213 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,213 Likes: 2 |
Tadiran will need a PUGW and version 15 to do sip.
|
|
|
|
|
Joined: Feb 2007
Posts: 10
Member
|
|
Member
Joined: Feb 2007
Posts: 10 |
What if I do h323 instead? I would actually prefer h323 as Cisco fully impliments h323 but only has limited support for SIP
Ed French CCIE#21241
|
|
|
|
|
Joined: Sep 2004
Posts: 4,213 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,213 Likes: 2 |
No..323 is not supported. You might want to look into using QSIG off the Coral on a BRI or BRI card. There are extensive white papers on this on the Cisco wesite.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,213 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,213 Likes: 2 |
No..323 is not supported. You might want to look into using QSIG off the Coral on a BRI or BRI card. There are extensive white papers on this on the Cisco wesite.
|
|
|
|
Forums84
Topics94,402
Posts639,369
Members49,808
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (metelcom),
450
guests, and
354
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
