|
Joined: Jul 2006
Posts: 7
Member
|
Member
Joined: Jul 2006
Posts: 7 |
I am an environmental consultant. I have a client with an old, probably defunct telephone panel board with numerous 1A2 400D KTU cards.
My issue is that a green colored liquid is leaking (very slowly) from the cards and we have been unable to identify its source or the exact make-up of the liquid.
Any help or insight would be greatly appreciated.
Ideally an MSDS of the source liquid would be optimal, but at this point I'll take any info I can get.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2002
Posts: 17,725 Likes: 19
Member
|
Member
Joined: May 2002
Posts: 17,725 Likes: 19 |
From all the cards? I can't think of any liquid of any kind in these cards. Are you sure it's not just moisture and corrosion? Copper, moisture and presence of battery cause a green looking gunk.
Retired phone dude
|
|
|
|
Joined: Jul 2006
Posts: 7
Member
|
Member
Joined: Jul 2006
Posts: 7 |
we are looking into that and not coming up with a moisture source. that may be the way to go, potentially analyzing a bulk sample for Cu to see if it is the primary constituent, aside from water.
I also have a photo. Let me see if I can attach it.
|
|
|
|
Joined: Jul 2006
Posts: 7
Member
|
Member
Joined: Jul 2006
Posts: 7 |
not seeing a quick way to attach. am I missing a shortcut? I have a pick with the liquid visible.
|
|
|
|
Joined: May 2002
Posts: 17,725 Likes: 19
Member
|
Member
Joined: May 2002
Posts: 17,725 Likes: 19 |
I'm not good with the picture thing. I know you have to have a host and link it but that's about all I know. I sure someone will help out in a bit if not I'll see if I can get someone to help ya.
Is it coming from a particular part of the card? those things are nothing but relays, resisters, diodes, and capacitors that's about it, might be a transistor or two.
Retired phone dude
|
|
|
|
Joined: Jul 2006
Posts: 7
Member
|
Member
Joined: Jul 2006
Posts: 7 |
That is probably it, but I have no familiarity with the equipment.
If you have an email address, I could send the pic direct. One photo in .jpg format.
The email tab above your postings is set to private.
No big deal, completely up to you.
|
|
|
|
Joined: May 2002
Posts: 17,725 Likes: 19
Member
|
Member
Joined: May 2002
Posts: 17,725 Likes: 19 |
Let's give it a bit to see if you get some help on the picture. I'd like it posted for all to see, could help someone else in the future. Bill
Retired phone dude
|
|
|
|
Joined: Jul 2006
Posts: 7
Member
|
Member
Joined: Jul 2006
Posts: 7 |
|
|
|
|
Joined: Sep 2005
Posts: 9,288 Likes: 11
Admin
|
Admin
Joined: Sep 2005
Posts: 9,288 Likes: 11 |
env guy If you want to send the pic to me or link address I'll get it posted for you. For the liquid it could be a leaky capacitor if there is a large electrolytic on the board it would most likily be the power supply filter cap.
|
|
|
|
Joined: Dec 2004
Posts: 5,722
Member
|
Member
Joined: Dec 2004
Posts: 5,722 |
Merritt, The 400 series KTUs are all dry caps, there is nothing I can think of that would contain a liquid unless there has been a liquid / high humidity issue (leaky roof, wet mop, broken water pipe, you know the drill). Green would normally mean corrosion due to induced moisture and battery. Green Jello? I prefer lime. Is this KSU in a high heat or corrosive area? Basically the board is no different than any computer board of that vintage and the components are generically the same. Good luck --- let us know what you see, jb. KLD
Ken ---------
|
|
|
Forums84
Topics94,410
Posts639,408
Members49,815
|
Most Online5,661 May 23rd, 2018
|
|
2 members (Toner, tech3500),
262
guests, and
38
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|