from the release notice:
Overview of SBX IP 320â„¢Release 2
Release 2 of Vertical’s SBX IP 320™ offers you more ways than ever to deliver
solutions to your customers.
New 8-HR Voice Mail Card (VMIB)
Total storage 8 hours.
Requires new VMIB hardware, part number 4000-80.
Release 2 is backward-compatible* with the two-hour voice mail card.
Ranger Cordless Digital phone
Rangerâ„¢ Standard is now supported on SBX IP 320.
Ranger part number is VC3014-00
New Voice Mail/Auto-Attendant features
Company Directory
This feature allows a caller reaching CCR menu to utilize the DTMF keys to “spell†the name of a
subscriber and be directed to their extension.
Park and Page
This feature allows a caller reaching a mailbox to select an option to be placed into a system park
zone and have the mailbox user paged.
Customer Controlled Routing (CCR) Option: Mailbox owner login
When a caller presses the CCR digit associated with a Mailbox Owner action, the system will
prompt the caller to select and log into their mailbox.
Customer Controlled Routing (CCR) Option: Route to mailbox as destination
When a caller presses the CCR digit associated with the station mailbox option, the call will be sent
to the designated VMIB mailbox.
Message Forwarding Change
Forwarding a message to another mailbox will no longer have the effect of deleting it from the
original mailbox (in 8-hour VMIB card only). The subscriber will use a separate action to save or
delete the original message.
Reply to Caller
This feature allows a caller listening to a message to press a soft key or a DTMF key to reply to the
internal station that left the message.
* The message forwarding feature works differently in the 2-hr VMIB card
Release 2 Features
© 2008 Vertical. Features and specifications subject to change.
Page 2 of 2
Other New Calling Features
Multiple Mailbox Buttons
One or more flex buttons may be programmed to point directly to specific mailboxes..
911 Emergency Call Priority
CO lines can be marked for 911 priority, for example to ensure that 911 calls go out an analog CO
when both analog and SIP trunks are in use
911 Attendant Notification
Attendant stations will get an alert and viewable log, when programmed, of all 911 calls dialed in
the system.
Daylight Saving Time
Automatic DST may be programmed.
CallerID Display for Second Incoming CO Call
ICLID Based Ring Assignment for DID calls
Currently, DID is available with SIP trunking. An ICLID table with maximum of 100 entries will route
calls to destinations in the DID conversion table based on matching ICLID on DID calls.
DND Forward to Mailbox
When programmed for voice mail forwarding, an internal or external call to a station in DND will
forward to voice mail.
Incoming CO Ring assignment to Networked Stations
A call can be set to ring a station on a VoIP-networked system.
New ‘Lunch’ Ring Mode Setting
System now includes Day, Night, Lunch, Weekend in the automatic timed ring mode settings.
Ring/Hunt Group Name Attribute
A Hunt Group can now be assigned a name up to twelve characters. The Group Name will be
displayed on incoming CO calls and intercom calls to the group.
Routing Options for calls to Stations in DND
When a DID/DISA call rings to a station in DND, a forwarding destination to Attendant or hunt/ring
group may be used.
IP Phone Backlit Displays
IP7000 series telephones can now support the following modes: Backlit when off-hook, Always on,
Always off
IP Phone Page Announcements
In addition to sending page announcements, IP phones can now receive pages (up to the limit of
VOIP card channels assigned to IP stations). This includes IP7000 series desk phones and Nomad
SP soft phone.
IP Phone Forwarding for Disconnected Stations
Calls may now ring to voice mail or mobile extension if the associated IP phone is not connected.
