|
|
|
|
Joined: Dec 2006
Posts: 29
Member
|
|
Member
Joined: Dec 2006
Posts: 29 |
I have a customer with a three month old STSe 4X8 that I installed. the system has worked flawlessly since installation. Got a call yesterday that the system auto attendant would not answer. I went to the site and ultimately found that some of the CO programming was defaulted (not all). I turned the system off and back on and most of the station programming seemed to default. I could find no explanation and once it was reprogrammed the system seemed to work fine. About mid morning today the customer called again with the same problem. I can see no obvious damage to the system such as burnt circuits. Any Ideas? With this being a new system I would not think it was a memory battery problem but that is what it seems like. Is the battery field replaceable? I don't think the customer is going to be happy if I have to send it in to have a battery replaced and they have to do with out a system for days. Thoughts? Suggestions?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2005
Posts: 971
Member
|
|
Member
Joined: Sep 2005
Posts: 971 |
Bill
You did check, and make sure the battery switch is turned on ?
-TJ-
|
|
|
|
|
Joined: Jan 2005
Posts: 15,382 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,382 Likes: 13 |
Am I safe in assuming that the battery switch is turned on and the memory retention switch is turned off (DIP switch #8)?
Ed Vaughn, MBSWWYPBX
|
|
|
|
|
Joined: Dec 2006
Posts: 29
Member
|
|
Member
Joined: Dec 2006
Posts: 29 |
|
|
|
|
|
Joined: Sep 2005
Posts: 971
Member
|
|
Member
Joined: Sep 2005
Posts: 971 |
Bill I would look real close at the power feeding the KSU. Real close 
-TJ-
|
|
|
|
|
Joined: Dec 2006
Posts: 29
Member
|
|
Member
Joined: Dec 2006
Posts: 29 |
What specifically should I be looking at on the power? I tried to talk them into a UPS but they were not interested. I did however install a high end surge suppressor power strip with EMI/RFI filter. Do you think I have had a surge or spike? I see no evidence of one and the supressor is still working. I am going to push the idea of a UPS again but do you think I have a bad memory battery? and is that battery field replaceable?
|
|
|
|
|
Joined: Sep 2005
Posts: 971
Member
|
|
Member
Joined: Sep 2005
Posts: 971 |
BILL
Yes the battery is replaceable, however i don't think that is the issue.
A. I would insist on a Breaker(20 or 15 amp) from
the breaker box to the outlet feeding the ksu.
no loop wiring (direct).
B. After same has been completed, i would take
my VOM and read all conductors associated with the outlet.
C. IMO take the power strip off the circuit for now.
D. No short cuts, we probably missed something on the original install which is coming back and
haunting us.
Remember,the ksu to power is the same as food to our body's.Pay me now or pay me later.
Oh one other thing.No first aid or bandaid...
(example ups/bbu or super doper power strip)
Once you are sure of the above, default both the
ksu and VM card.
Requires some effort on your part, but then you can say you done your best.
-TJ-
|
|
|
|
Forums84
Topics94,402
Posts639,367
Members49,808
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (BrianS, justbill),
254
guests, and
387
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
