XTSc FP2 Upgrade Issues

Support Service-Disabled Veterans!
Discount software from Direct Deals

Print Thread

Rate Thread

Page 2 of 2

1

2

Re: XTSc FP2 Upgrade Issues #209107 09/26/05 01:52 AM
Joined: Oct 2004 Posts: 1,492 central pa oobie Member
oobie Member Joined: Oct 2004 Posts: 1,492 central pa	in term programming right befor the password prompt what rev of software are you running?

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: XTSc FP2 Upgrade Issues #209108 09/26/05 03:29 AM
Joined: Apr 2005 Posts: 41 Delaware Syme Member
Syme Member Joined: Apr 2005 Posts: 41 Delaware	Eng. V2.00 p04-2FE3 Do you happen to know the default password for WinDBA? I saw in the help section of WinDBA that there is a spot for VMID when programming the overflow for UCD groups. I'm wondering if I have to do it through that interface rather than on the 30 button (Although the 2.00 manual says it should work).

Re: XTSc FP2 Upgrade Issues #209109 09/26/05 03:38 AM
Joined: Apr 2005 Posts: 41 Delaware Syme Member
Syme Member Joined: Apr 2005 Posts: 41 Delaware	I'm also wondering if maybe using a database from a 1.0 system on a 2.0 system is causing the issue with the missing features. Unfortunately I can't shut it down to test it out during business hours.

Re: XTSc FP2 Upgrade Issues #209110 09/26/05 07:05 AM
Joined: Apr 2005 Posts: 41 Delaware Syme Member
Syme Member Joined: Apr 2005 Posts: 41 Delaware	So it turns out I needed to download the DB to WinDBA for it to convert to a 2.0 DB. I tried doing this by "Downloading from File" using my 1.0 backup. I selected that it was an FP1 DB and then I "Uploaded to File". I used this uploaded file to upload through HyperTerm. Still doesn't to work.

Re: XTSc FP2 Upgrade Issues #209111 09/26/05 11:36 AM
Joined: Apr 2005 Posts: 41 Delaware Syme Member
Syme Member Joined: Apr 2005 Posts: 41 Delaware	Another piece to the puzzle. Apparently the XTSc is a little different than the XTS in programming. They told me you must default the system at the same time you toggle the PMU. (Which solved the looping term issue)