|
|
|
|
Joined: Oct 2004
Posts: 37
Member
|
|
Member
Joined: Oct 2004
Posts: 37 |
I have a MICS w/6.1. PRI works on current carrier.
Customer got a PRI from CoMedia. When I connect to Comedia everything looks good with no alarms as long as the circuit is idle. when I try to make a call, the call drops and "inv IE content" is displayed. I know it is a carrier issue but this is our second attempt and I am going on my 5th hour sitting here waiting for them to figure it out. Current settings are: DMS100, ESF, B8ZS, Clocking source is Primary. Have 23 B channels 24th is the D channel. Carrier is acending and I am decending. Thanks for any help.
If your not having fun, go find something else to do.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
I would hope that they gave you the config info.
But NI-2 is the normal instead of DMS-100.
If I was there for any length of time, I start changing setting to see if it makes a diff and maybe they gave me the wrong info.
I couldn't find anything on that INV-IE error.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Oct 2004
Posts: 37
Member
|
|
Member
Joined: Oct 2004
Posts: 37 |
They called it at 7 pm that night. I tried several options with the same result. The dynamic router they are using is new to them and they could not get the manufacture on the phone to help them.
If your not having fun, go find something else to do.
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
The switch type and protocol are different things. All these guys with soft switches think all PBXs run the same. we just did one on a Magix with a 5ESS and custom protocol. We have never had to have the CO enable L1 flags on custom, until now. So with all these new "soft switches" coming out, its going to make some PRI stuff hit and miss.
|
|
|
|
|
|
|
sts pft
by davetel - 01/14/25 01:31 PM
|
sts pft
by davetel - 01/11/25 06:42 PM
|
|
|
Forums84
Topics94,462
Posts639,668
Members49,825
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
