|
|
|
|
Joined: Jan 2003
Posts: 54
Member
|
|
Member
Joined: Jan 2003
Posts: 54 |
A customer of mine just got a MICS 4.1 with a NAM voice mail. It was pulled out of service from a failed business.
I installed it today, powered up and plugged in a phone at port 101 (probably ext.221)
The arrows flash, and then the screen says IN MAINTENANCE.
Isn't this the message a phone would display if its module is disabled via maintenance programming?
Any ideas how to get into programming if this is the case?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2006
Posts: 202
Member
|
|
Member
Joined: Aug 2006
Posts: 202 |
is your NAM copper or fiber
was there a 2 or 6 port fiber expansion in slot 2?
in my experiences this will say in maintence if an expansion card was in slot 2 and you did not put the same type of card in the system
try adding a 2 or 6 port card
|
|
|
|
|
Joined: Jan 2003
Posts: 54
Member
|
|
Member
Joined: Jan 2003
Posts: 54 |
It's a fiber system.
And yes, there was a 2-port expansion card. I'll try putting it back in.
|
|
|
|
|
Joined: Jan 2003
Posts: 54
Member
|
|
Member
Joined: Jan 2003
Posts: 54 |
Works great after putting the expansion card in the correct slot!
I did look back and found this answer in previous posts, too. In the stress of the moment, I just posted my question before I dug back into the archives.
Great board, this.
|
|
|
|
|
Joined: Aug 2006
Posts: 202
Member
|
|
Member
Joined: Aug 2006
Posts: 202 |
|
|
|
|
|
|
|
sts pft
by davetel - 01/14/25 01:31 PM
|
sts pft
by davetel - 01/11/25 06:42 PM
|
|
|
Forums84
Topics94,462
Posts639,668
Members49,825
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
