|
|
|
|
Joined: Jun 2007
Posts: 5
Member
|
|
Member
Joined: Jun 2007
Posts: 5 |
Currently there is a Nortel BCM400 at the main office and have two remote sites connected back to the main office, by a VPN tunnel. Both sites have IP2002 & 2004 phones installed at each location they can call in and out at all the stations and make intercom calls from both sites to the main office. If someone from one of the remote sites, tries to call the other remote site, the phone will ring and it will display were the call is coming from but no voice would be heard on either side. The odd thing is if someone from either remote site calls the 7 digital outside number which is mapped to a station’s hunt group the call will go through just fine. Anyone have any ideas on what can be the problem? Thanks for your assistance.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2005
Posts: 2,521 Likes: 4
Member
|
|
Member
Joined: Apr 2005
Posts: 2,521 Likes: 4 |
Could be a fire wall issue.
We get old too soon, smart too late
|
|
|
|
|
Joined: Aug 2002
Posts: 1,087 Likes: 1
Member
|
|
Member
Joined: Aug 2002
Posts: 1,087 Likes: 1 |
i've seen this myself. It has to do with your VPN setup. You need tunnel to tunnel routing (aka: spoke to spoke). What type of VPN equipment are you using?
|
|
|
|
|
Joined: Jun 2007
Posts: 5
Member
|
|
Member
Joined: Jun 2007
Posts: 5 |
Each location has a Cicso 506E installed and both of them get routed back to the main office. Currently if I am at the one remote site I can not connect/ping any equipment back at the other remote site. So I am taking I need to get that changed.
|
|
|
|
|
Joined: Oct 2008
Posts: 8
Member
|
|
Member
Joined: Oct 2008
Posts: 8 |
it is likely a firewall issue. we just had this exact same problem with a BCM50 2.0 and 3.0 networked. the problem is in the port configuration on the remote firewalls. We spent days with top level Nortel support on this. They tried everything they could think of and this was the resolution. I will verify the exact number and get it to you.
|
|
|
|
|
Joined: Oct 2008
Posts: 8
Member
|
|
Member
Joined: Oct 2008
Posts: 8 |
here are the port numbers
SIP is 5160
H.323 is 1740
|
|
|
|
|
|
|
sts pft
by davetel - 01/14/25 01:31 PM
|
sts pft
by davetel - 01/11/25 06:42 PM
|
|
|
Forums84
Topics94,462
Posts639,668
Members49,825
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
77
guests, and
42
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
