|
|
|
|
Joined: Sep 2005
Posts: 11
Member
|
|
Member
Joined: Sep 2005
Posts: 11 |
I recently ran into a similar issue with a 3.7 BCM 400. The VM was down, but all the sets worked fine. The LEDs were still flashing from a reboot days before they called me. I gave it a full cold boot, no more flashing LEDs, but also no VM. No response from the console port either.
It turns out that there is a problem with the DSPs or something similar. You have to remove the power cord for AT LEAST 15 minutes. After that, the system will fully boot and the VM will work again. The system even booted up very quickly this time!
This is a strange one that had me stumped. :bang:
Have Fun,
Wayne
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
thanks for the tip madprofessor
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Forums84
Topics94,402
Posts639,369
Members49,808
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
157
guests, and
400
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
