|
|
|
|
Joined: Oct 2004
Posts: 2
Member
|
|
Member
Joined: Oct 2004
Posts: 2 |
I am trying to setup a TVSe in one of our Telrad S-128s. The TVSe came out of an S-400 from an old site, but had been in storage for 4 years.
The S-128 has an IPEX1 in a UNITe cabinet running eCA1.20
The TVSe is about the same vintage (2002-03) and I recently replaced the failed hard drive with a CF card with TVSe software 3.48. The U62 chip is v2.7.
Currently I have the TVSe card configured and running (Linux side). The TVSe is configured in slot 3-1 in eManager, but the PBX does not see the card.
There are no bent pins on the backplane, and and there are available power Units in "Cabinet" 3 as the only card on that PS1 module is the TVSe.
Any ideas on why the TVSe is not seen by the PBX? Do I need to upgrade the u62 chip or E2E version? It has been many years since I installed Telrads, so I may be a bit rusty on the software versions. ;-)
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2004
Posts: 2
Member
|
|
Member
Joined: Oct 2004
Posts: 2 |
PBX has 8 Vcoder licenses.
|
|
|
|
|
Joined: Feb 2005
Posts: 274
Member
|
|
Member
Joined: Feb 2005
Posts: 274 |
I believe your u62 needs to be 3.2 for 3.48 software
TG
|
|
|
|
Forums84
Topics94,402
Posts639,369
Members49,808
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
367
guests, and
525
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
