|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
I believe the VM will record after a disconnect based on the "seconds of silence" setting in the system. I have mine set for 10 I believe default is 4. At any rate is just a short time.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2006
Posts: 16
Member
|
|
Member
Joined: Oct 2006
Posts: 16 |
You are correct re: seconds of silence accept Vertical had us change to 15 seconds thinking that was part of the problem. Also, they had us change non seconds of silence to 99.
|
|
|
|
|
Joined: Jun 2004
Posts: 4,552
Moderator-Comdial, ESI, Voicemail, Cisco
|
|
Moderator-Comdial, ESI, Voicemail, Cisco
Joined: Jun 2004
Posts: 4,552 |
If that were the case (seconds of silence), it would have cut off the message as it was being left, unless the person paused for that length of time before they began talking. It makes sense to me that this isn't the case. Am I right?
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
it cuts off at the tone to begin your recording.
|
|
|
|
|
Joined: Jun 2004
Posts: 4,552
Moderator-Comdial, ESI, Voicemail, Cisco
|
|
Moderator-Comdial, ESI, Voicemail, Cisco
Joined: Jun 2004
Posts: 4,552 |
Mark, look in your voicemail book under Config File. Look at "No Record Beep" (vm.cfg entry). Based on the description in the book, you could possibly try this. It will supposedly disable the beep that you hear after "please speak after the tone..."
If it is, in fact, the beep that's causing the problem, this should prove it (if the description in the book is correct).
|
|
|
|
|
Joined: Aug 2004
Posts: 9,169 Likes: 18
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,169 Likes: 18 |
If you disable the beep how will the caller know when to speak if the prompt says "please speak after the tone"? Haven't tried it..has anyone else?
|
|
|
|
|
Joined: Jun 2004
Posts: 4,552
Moderator-Comdial, ESI, Voicemail, Cisco
|
|
Moderator-Comdial, ESI, Voicemail, Cisco
Joined: Jun 2004
Posts: 4,552 |
If that entry does what the book says, he should at least be able to use it to test and prove the problem. If the beep is actually causing the telco to drop the line, I would say it's a telco problem, not a Vertical problem. This beep has been there for how long??
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
I believe that record beep is referring to a voice record or conversation record. I'm hoping Anthonyh can shed some light on the switch side.
Mark
|
|
|
|
|
Joined: Sep 2004
Posts: 1,436
Member
|
|
Member
Joined: Sep 2004
Posts: 1,436 |
Originally posted by eastcoast:
When calling from my line 2 where I have Verizon local and long distance the test fails and I get cut off at the sound of the voicemail beep prompting you to leave a message. However, from my line 1 where I have Verizon local and MCI long distance the test calls work every time and have never failed calling four sites where I'm having the problem.
I called Verizon and tested on line 1 and then the Verizon CSR switched my line 1 to all Verizon service and the voice mail failed when testing. She (Barbara from Verizon-a wonderful helpful woman) switched my service back to MCI and the tests all passed. Sounds like you proved it's a problem with Verizon LD. If the customer doesn't have Verizon LD, most calls would work fine until someone that does have Verizon LD calls. Not sure if you can do it, but try changing the frequency of the beep.
Joe
---
No trees were harmed as a result of this posting; however, many electrons were severely inconvenienced.
|
|
|
|
|
Joined: Jun 2004
Posts: 4,552
Moderator-Comdial, ESI, Voicemail, Cisco
|
|
Moderator-Comdial, ESI, Voicemail, Cisco
Joined: Jun 2004
Posts: 4,552 |
I don't think changing the frequency of the beep is going to be possible.
Mark, I was thinking the same about that VM.CFG entry, but if you read the description in the book it makes me think otherwise. I guess the only way to know for sure is to try it.
Joe, I agree with you. I think the problem is now going to be PROVING it to Verizon.
|
|
|
|
Forums84
Topics94,402
Posts639,365
Members49,808
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
308
guests, and
116
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)
